Installing the Wall Bracket - Dry Wall

To install the Wall Bracket, perform the following steps:

1.Mount the Wall Bracket on the wall.

a.To position the Wall Bracket, align the mounting holes on the Wall Bracket with the holes on the wall.

b.Using six M10 bolts, secure the Wall Bracket to the wall.

Note:  Do not fully tighten the six bolts to allow leveling adjustments.

2.Check if the Wall Bracket is evenly level.

a.Position the spirit level on top of the Wall Bracket.

b.Adjust the Wall Bracket so that the bubble is centered between the lines on the tube.

3.Tighten the bolts and make sure that the Wall Bracket is firmly secured to the wall.